Are you tired of manual feeding on your flow packing machine? BENE, fret no more! The auto feeder is here to save the day. In this comprehensive guide, we’ll walk you through everything you need to know about using the auto feeder efficiently. From setup to troubleshooting, we’ve got you covered. Let’s dive in!
1. Introduction
Picture this: you’re running a packaging operation, and the last thing you need is slow, manual feeding on your flow packing machine. That’s where the auto feeder steps in to revolutionize your workflow. In questa guida, we’ll explore how this nifty device can streamline your packaging process and boost your productivity.
2. What is an Auto Feeder?
Auto Feeder is a device install in the tailstock of the flow packing machine, it suitable for biscuits(no matter round shape or rectangle shape), popsicle , Ice lolly,such regular shape and hard product. By pushing with the stainless chain, the product could by push and drop then send into the bag to finish the package.
An Ingenious Innovation: The auto feeder is a device designed to automatically feed products into a flow packing machine. It replaces manual labor, saving time and reducing the risk of errors. Think of it as your reliable assistant, tirelessly ensuring a smooth packaging process.
3. Advantages of Using the Auto Feeder
Efficiency at its Finest: With the auto feeder, say goodbye to tedious manual feeding. It significantly speeds up the packaging process, allowing you to handle larger volumes with ease. Più, by eliminating the need for constant human intervention, it minimizes the risk of errors, ensuring consistent quality output.
4. How to Set Up the Auto Feeder
The below picture on the arrow position, loose the screw you could move the device front or back to settle the auto feeder on the right position.
Getting Started: Setting up the auto feeder is a breeze. Begin by securely attaching it to your flow packing machine by the fixed screws. Once everything is in place, calibrate the feeder to accommodate your specific product dimensions.
5. Adjusting Settings for Different Products
After the auto feeder finish installed below simply adjustment need to be done.
The above picture on the arrow position, loose the screw you could move the device front or back to control the distance to meet your product width.
The above picture on the arrow position, loose the screw you could move the device left or right to control best position to support your products.
The above picture on the arrow position, by controlling the screw, you could adjust the size of the block to meet your product length.
The above picture on the arrow position, by controlling the screw, you could adjust the height of your product allow to go through. It’s the most important step, make sure the pusher block could push your product to go, the key is adjust the height.
